The unit has a safety key switch and can control 1 or 2 channels (with a maximum of 4 Shotunits in line on each channel). The units in line will all fire at the same time when the channel is selected.
The controller has a LED indicator to check if units are connected to the selected channel. Each 2 seconds a pulse can be given to operate (fire) the systems. If rapid fire is required, the sequencer on the shotunit can be used.
The controller comes complete with a manual and 1,5 metre cable.
| Size: |
18*10*8 cm |
| Weight: |
2 kg |
| Voltage: |
230 volt |
| Power: |
120 watt |
| Capacity: |
1 to 4 E-Shotunits per channel |
| Consumption: |
- |
| Output: |
12 volts pulse signal and 18 volt power signal |
| Range: |
till a maximum of 100 metres from controller to the last unit |
| Use: |
indoor & outdoor (dry weather) |
| Sound: |
- |
| Colour: |
blue |
| Included: |
Eurocable |
| Not included: |
E-Shotunits |
| Option 1: |
the controller can also be used for pyro systems |
| Remark 1: |
a maximum of 4 systems can be put on one controller channel |
| Remark 2: |
between the controller and the last unit in line a maximum cable length of 100 is allowed |